Skip to main content
< All Topics
Print

Rode Videomic Microphone

The original Røde VideoMic shotgun microphone with its integrated black rubber band suspension shock mount, attached to a camera hot-shoe base with a coiled audio cable.

Description

The [Røde VideoMic](https://rode.com/en-us/products/videomic) is a professional-grade, battery-powered 1/2-inch condenser shotgun microphone designed specifically for consumer video cameras, DSLRs, and personal audio recorders. Built with a rugged, reinforced ABS construction, it offers mobile journalists, vloggers, and independent filmmakers a high-performance audio solution for isolating targeted sound fields.

Utilizing a highly directional supercardioid polar pattern, the VideoMic tightly captures audio directly in front of the lens while heavily attenuating ambient noise from the sides and rear. It features an integrated rubber-band suspension shock mount engineered to eliminate structural vibrations and camera handling noise. Backed by a rear panel power console, it offers customizable controls including an on/off switch with a battery status LED, a switchable 80Hz high-pass filter to control low-end environmental rumble, and an internal adjustable attenuation pad (-10dB/-20dB) for distortion-free capture of loud sound sources.

Technical Specifications

Technical Specifications for Røde VideoMic Shotgun Microphone
Feature Specification
Acoustic Principle Line Gradient
Active Electronics JFET impedance converter
Capsule Size 0.50″ (12.70 mm)
Polar Pattern Supercardioid (Highly Directional)
Frequency Range 40Hz – 20kHz
High-Pass Filter (HPF) Selectable @ 80Hz (12dB/octave) for low-end noise reduction
Level Control / PAD Three-step adjustment (0dB, -10dB, -20dB selectable inside battery bay)
Output Impedance 200Ω
Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1kΩ)
Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) ± 2 dB @ 1kHz
Equivalent Noise Level 20dBA (A-Weighted per IEC651)
Power Requirements 1x 9V Alkaline Battery (Provides over 100 hours of continuous runtime)
Output Connection 3.5mm TRS Mini-Jack (Permanently attached coiled dual-mono cable)
Mounting Options Integrated camera shoe mount with base 3/8″ and 1/4″ threaded inserts
Dimensions 9.76″ Length x 3.86″ Height (248 mm x 98 mm)
Weight 3.88 oz (110 g) without battery
Table of Contents